HIGH AND LOW TEMPERATURE CABLES

For greater resistance in high and / or low temperature environments, this line is composed of bare copper cables, tinned or nickel plated, insulated in various types of temperature resistant polymers.

Mat 500ºC

For the application in environments or equipment with high temperatures such as stoves, ovens, injection molding and extruders among others.

Materials:

Conductor: bare electrolytic copper, nickel plated copper* or pure nickel wires*, stranding class 4.

Insulation: Mica tape.

Coverage: white fiberglass braid with black stripe.

Specifications:

EPAN 37 (Pan Electric)

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 500 º C

Flexible at temperatures below 0 °C

Excellent balance of electrical, chemical and thermal properties.

Isolation voltage: 750V

Flame resistant

Should be applied in dry environments.

Recommended for fixed use

Section of 1.0 to 10mm2 (others on request).

*These products will be provided on request

KAT 400ºC

For the applications in environments or equipment with high temperatures such as stoves, ovens, injection molding and extruders among others.

Materials:
Conductor: nickel plated* copper wire, Stranding class 4.
Insulation: Kapton tape.
Coverage: white with fiberglass braid with yellow stripe.

Specifications:
EPAN 37 (Pan Electric)

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 400 º C

Flexible at temperatures below 0 °C

Excellent balance of electrical, chemical and thermal properties.

Highly resistant to radiation

Isolation voltage: 750V

Flame resistant

Should be applied in dry environments.

Recommended for fixed use

Section of 1.0 to 10mm2 (others on request).

*These products will be provided on request

Multiples of silicone 300ºC

Used for applications where heat resistant conductors are needed, such as electric resistances, heaters and connections of portable devices, which operate in environments up to 280 ºC.

Materials:

Conductor: bare electrolytic copper, nickel-plated copper, or pure nickel wires*, Stranding class 4.

Insulation: cross-linked silicone rubber to 300 ºC

Coverage: cross-linked silicone rubber to 300 ºC

External Braid: fiberglass braid (optional).

These cables can have non-hygroscopic polyester tape and braided copper wire shielding, where provided. All cables in silicone withstand temperatures down to -70 º.

Specifications:

Identification of Conductors: Veins in white / numbered or colored upon request.

Applicable Standards:

EPAN 06 300 °C (Pan Electric)

EPAN 04 200 °C (Pan Electric)

Packaging: Coil

DOWNLOAD PDF

Properties:

Working Temperature: Thermal stability peaks up to 300 °C.

Flexible at temperatures below 0 °C (up to -70)

Silicone provides good resistance to acids, grease and moisture.

Resistance to Ozona

Good resistance to oil

Fiberglass braid: provides greater mechanical strength and assists in thermal protection.

*These products will be provided on request

Pansil 300ºC

Used for electrical resistances, engines, light fixtures, stoves and the like that operates in environments with temperatures up to 280 ºC.

Materials:

Conductor: bare electrolytic copper, nickel plated copper*, mixed (copper + stainless steel)*, stainless steel*, annealed, Stranding class 4.

Insulation: cross-linked silicone rubber to 300 °C, ceramic color.

External Braid: fiberglass braid (optional).

Specifications:

EPAN 17 (Pan Electric)

DOWNLOAD PDF

Properties:

Working Temperature: Thermal stability peaks up to 300 °C.

Flexible at temperatures below 0 °C (up to -70)

Silicone provides good resistance to acids, grease and moisture.

Resistance to Ozona

Good resistance to oil

Fiberglass braid: provides greater mechanical strength and assists in thermal protection.

*These products will be provided on request

Panflon 260ºC

For the use in ovens, boilers, dryers, engine lead wires, electronic equipment, control cabins and the chemical industry. These cables are resistant to acids, bases, solvents, oil and petroleum. Flame resistant

Materials:

Conductor: bare copper electrolytic copper, tinned, nickel-plated* or pure nickel*, annealed, regular formation.

Insulation: Fluorinated Polymer type PFA (260 ºC) extruded. White

Specifications:

EPAN 46 (Pan Electric)

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 260 ºC (PFA) or 200 °C (FEP).

High insulation resistance

High resistance to Ozona

Flame resistant

Excellent dielectric properties and chemical resistance

Excellent non-stick feature

Excellent resistance to weathering and abrasion

*These products will be provided on request

Pansil R 200ºC

Used for electrical resistances, engines, ovens and the likes. Specially developed for environments which require conductors insulated with silicone and greater resistance to tearing and abrasion.

Materials:

Require conductors insulated with silicone and greater resistance to tearing and abrasion.

Insulation: special silicone rubber cross-linked to 200 ºC. Blue

External Braid: fiberglass braid (optional).

Specifications:

Metric series: EPAN 11 - 750V.

AWG series: EPAN 10 (Pan Electric) - 600V.

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 200 ºC.

Flexible at temperatures below 0 °C (up to -70)

Silicone provides good resistance to acids, grease and moisture.

Resistance to Ozona

Greater resistance to tearing and abrasion

Good resistance to oil

Fiberglass braid: provides greater mechanical strength and assists in thermal protection.

Pansil L 200ºC

Used for (lead) connections of electric engines class H, light fixtures, heaters, stoves, ovens and similar products, for voltages of 300/500V.

Materials:

Conductor: bare wires electrolytic copper, annealed, stranding class 4.

Insulation: cross-linked silicone rubber for 200 º C, white color.

External Braid: Braid strands of glass (optional) fiber.

Specifications:

EPAN 45 (Pan Electric) - Class 4 - 200ºC

IEC 60245 - Class 5 - 180ºC

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 200 ºC

Flexible at temperatures below 0 °C (up to -70°C)

The silicone provides good resistance to oils, acids, grease and moisture.

Resistance to Ozona

Good resistance to oil

Fiberglass braid: provides greater mechanical strength and assists in thermal protection.

Pansil UL 200°C

Used for internal connections of engines and equipment.

Materials:

Conductor: bare or tinned copper wire, Class 5, annealed.

Insulation: cross-linked silicone rubber for 200 ºC

Specifications:

UL 758 - STYLE 3644

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 200 ºC

Insulation voltage: 1000V.

Flexible at temperatures below 0 °C (up to -70 ºC)

Silicone provides good resistance to oils, acids, grease and moisture.

Resistance to Ozona

Flame resistant

Pansil UL 200ºC

Used for internal connections of engines and equipment.

Materials:

Conductor: bare or tinned copper wire, annealed

Insulation: cross-linked silicone rubber for 200 ºC

External Braid: fiberglass braid (one braid for the Style 3125 and two braids for the Style 3126).

Specifications:

UL 758 - STYLE 3125 - Seções 8 a 2 AWG

UL 758 - STYLE 3126 - Seções 1 a 4/0 AWG

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 200 ºC

Isolation voltage: 600V

Flexible at temperatures below 0 °C (up to -70°C).

The silicone provides good resistance to oils, acids, grease and moisture.

Resistance to Ozona

Flame resistance

Fiberglass braid: provides greater mechanical strength and assists in thermal protection.

Pansil M 200ºC

Used for electrical resistances, engines, light fixtures, heaters, stoves and similar products.

Materials:

Conductor: bare electrolytic copper wire, annealed, stranding class 4.

Insulation: cross-linked silicone rubber for 200 ºC

External Braid: Fiberglass braid (optional)

Specifications:

EPAN 11

NBR NM 274 180ºC.

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 200 ºC

Flexible at temperatures below 0 °C (up to -70°C)

Silicone provides good resistance to acids, grease and moisture.

Resistance to Ozona

Good resistance to oil

Fiberglass braid: provides greater mechanical strength and assists in thermal protection.

Panalt 200ºC

Used in engines lead wires, ignitions and equipment of medium voltage.

Materials:

Conductor: bare electrolytic copper wire, annealed, stranding class 4.

Separator: non-hygroscopic polyester tape

Insulation: cross-linked silicone rubber for 200 ºC

Coverage: cross-linked silicone rubber for 200 ºC

Specifications:

Identification of Conductor: Insulation: Yellow

Coverage: White

Applicable Standard: EPAN 20 (Pan Electric)

Packaging: Section 1.0 to 16mm2: 100m roll

Section of 25 to 240 mm2: Coil

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 200 ºC

Flexible at temperatures below 0 °C (up to -70°C)

The silicone provides good resistance to acids, grease and moisture.

Resistance to Ozona

Panvidro 200ºC

Used in environments with temperatures up to 200 °C and voltages up to 300V. For internal connections of heaters, ovens and similar products, where flexibility of the conductor is required.

Materials:

Bare electrolytic copper wire, copper plated*, stainless steel* or pure nickel*, stranding class 4, soft temper.

Insulation: Spiral fiberglass braid impregnated with heat-resistant varnish.

Specifications:

EPAN 36 (Pan Electric).

DOWNLOAD PDF

Properties:

Working Temperature: Thermal stability peaks up to 400 °C.

The stranding class 4 of copper wires conductor provides good flexibility in the conductor.

*These products will be provided on request

Pansil 200ºC

Used for electrical resistors, engines, light fixtures, heaters, stoves and other similar products.

Materials:

Conductor: bare electrolytic copper, annealed, stranding class 4.

Insulation: cross-linked silicone rubber for 200 º C

External braid: fiberglass braid (optional).

Presentation

Resistor: resistive wire

Insulation: cross-linked silicone rubber for 200 ºC. White.

External braid: fiberglass braid (when specified).

Specifications:

Metric series: NBR 16093 - 750V

AWG Series: EPAN 10 (Pan Electric) - 600V

DOWNLOAD PDF

Properties:

Working Temperature: Thermal stability peaks up to 200 °C.

Flexible at temperatures below 0 °C (up to -70°C)

Silicone provides good resistance to acids, grease and moisture.

Resistance to Ozona

Good resistance to oil

Fiberglass braid: provides greater mechanical strength and assists in thermal protection.

Panlides X 150ºC

Used as internal lead wires of engines and other types of equipment. They are provided to operating temperature at rate not to exceed 150 ºC.

Materials:

Conductor: nickel plated copper wire, stranding class 4.

Insulation: XLPO thermoset compound

Specifications:

Applicable Standards: CSA 22.2 No. 127-99

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 150 °C.

Good resistance to acids and bases

Good resistance to water and oils

Good mechanical properties

Flame resistant, non-halogenated, low smoke emission.

Panlides 130ºC

Used as lead wires of engines and other types of equipment. They are provided to operating temperature at rate not to exceed 130 °C.Materials:Conductor: bare or tinned electrolytic copper wires, annealed, stranding class 4.Isolation: ethylene propylene rubber compound (EPR)Specifications:Applicable Standards: Metric series: NBR 9114 - 750VAWG Series: EPAN32 (Pan Electric) - 600V

DOWNLOAD PDF

Properties:Working temperature: thermal stability up to 130 °C.Excellent resistance to OzonaExcellent weather resistanceGood resistance to acids and basesGood water resistanceGood resistance to radiation

Panflex 105ºC

Used for control panels, engines, reactors, small converters and the like, which operate in environments with temperatures up to 105 ºC.

Materials:

Conductor: bare or tinned electrolytic copper wires, annealed, stranding class 4.

Insulation: thermoplastic polyvinyl chloride compound (PVC) to 105 °C

Specifications:

Applicable Standards: Metric series: NBR 9117 - 750V

AWG Series: EPAN 41 (Pan Electric) - 600V.

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 105 °C.

Good resistance to oils.

Flame resistant

Moderate resistance to acids and bases

Panlink 90ºC

For the application in environments or equipment with high temperatures such as stoves, ovens, injection molding and extruders among others.

Materials:

Conductor: nickel plated copper wire, stranding class 4.

Insulation: Mica and Kapton tape.

Coverage: white fiberglass braid with red stripe.

DOWNLOAD PDF


Panflex 70ºC 750V PVC

Used for control panels, engines, reactors, small converters and the like, which operate in environments with temperatures up to 70 ºC.

Materials:

Conductor: bare or tinned electrolytic copper wires, annealed, stranding class 4.

Insulation: thermoplastic polyvinyl chloride compound (PVC) to 70 °C.

Specifications:

Applicable Standards: EPAN 40 (Pan Electric): Metric series 750V, AWG 600V.

DOWNLOAD PDF

Properties:

Working temperature: thermal stability up to 70 °C.

Good resistance to oils.

Flame resistant

Moderate resistance to acids and bases